All actions of the loading and unloading manipulator of the numerical control machine tool are run according to the specified program. Generally speaking, after the installation and debugging of the numerical control machine tool robot, the numerical control machine tool robot can work step by step. The automatic assembly line manufacturer tells you that you cannot change the program randomly when using the numerical control machine tool robot.

After the installation and commissioning of the CNC machine tool robot, professional staff will train the operators. In order to facilitate the use of customers, we provide customers with a user program management interface. According to the user's own definition, we can manage the program, select the program to use, edit the program, copy the program, etc.

However, users should pay special attention to that the management system of the program cannot be changed casually. If there is a program to be changed, it must be changed by relevant professionals. When changing the action, the accuracy of the data must be ensured. When the robot system integration is running, it is necessary to teach manually, save the data, and then start the machine. If the data is wrong, it will lead to a direct mechanical collision, which will be more dangerous. Every time you start the machine, make sure that the data will not be wrong. If the machine collides, it will cause great damage to the CNC machine tool robot, affect the accuracy of the manipulator, and have a certain impact on the servo motor, gear, rack, bearing and electrical signals.

The robot system integration equipment is provided with free installation technical support. After the equipment is in normal operation, our technical guidance personnel will stay on site and answer the temporary questions of the equipment users at any time. During the use of the equipment, we will contact you regularly to inquire about the use. After receiving the required call, we guarantee door-to-door service, on call.