No matter the use of truss robot or loading and unloading manipulator, there are many precautions. The following automated assembly line is introduced to you. I hope you can use the truss robot more safely and conveniently.

1、 Precautions for the operator: when starting the truss robot, pay attention to whether the robot recovers to the original position, and stop starting the robot when the robot is not in the original position after turning over the main switch of the truss robot. After turning over the truss robot switch, check whether the emergency button of the external control box and the emergency stop button of the vacuum pump have been pressed down. If they have been pressed down, turn them over first, and then start the machine. After stopping turning over the main switch of the robot, press the external emergency stop switch to get the effect. When the external emergency stop switch is pressed down, press the start button to start the robot, which will show a single step. It is necessary to check the direction of pressing the emergency stop switch and turn it up. Press the reply button to keep the robot running.

2、 Production and operation of truss robot: Before starting up and operating, it is necessary to know the mission that the truss robot will perform according to the programming. It is required to know that the truss robot controls the safety switch, sensors and control signals, and pay attention to the control cabinet and conditions. Know the position of the peripheral safety switch of the truss robot, and be able to find the button in case of emergency. The truss robot operates at a fast speed. All personnel shall not stay near the packing direction or the guardrail. All operators shall not approach the moving track of the robot. The equipment protection personnel shall be responsible for the protection.

3、 Safety measures: strictly observe the safety rules to prevent accidents or injuries. It is necessary for the personnel responsible for the protection system and review to review and acknowledge. All circuits related to the emergency stop have been interlocked safely and correctly according to the corresponding safety specifications. During protection or inspection, it is required to press the emergency stop switch at any time to stop the truss robot at any time.

4、 Usual use and protection of truss type robot: If the robot needs to be manually operated due to protection or production process, it should be ensured that there are no relevant workers or obstacles on the robot's walking road scale, and the robot speed should be gradually adjusted from fast to slow. The robot system integration tells you that manual operation at low magnification speed can increase the robot's control and safety, and prevent mechanical damage and loss caused by excessive speed.